SKU: elc-20613-1

Elinchrom ELC Pro HD500 (206131)

Warranty: 1 Year by Elinchrom
  • List Price: RM5,724.00

  • Best Price: RM4,770.00

    Inclusive 6% GST

GST is non-deductable for local purchase. Please do not write in to enquiry tax free price.

For international customers (both billing and shipping address located overseas), please use discount code "GSTREBATE" at checkout for GST rebate.

Currently sold out / Pre-order only*

*Please contact us for stock availability on pre-order item.

The ELC Pro HD 500 Flash Head from Elinchrom is evidence of the company's continued commitment to pushing the envelope in monolight design. Elinchrom has packed the ELC Pro HD 500 with professional features we've come to expect from a flash head of this caliber and added quite a bit more. Short recycling times coupled with fast flash durations make freeze-motion, stop-action shooting possible. In fact, up to 20 frames per second is possible at minimum power. An intelligent low noise, temperature-activated fan keeps the head cool and lengthens the life of both the flash tube and modeling lamp. A pre-flash detector lets you integrate your on-camera flash into your studio system.

Power, variable continuously from 7 to 500W/s, can be mimicked by the 300W proportional modeling lamp to preview your effects. Although Elinchrom provides one, you can swap the sync cord with a separately purchased 8-channel transceiver for wireless triggering from your camera. The head has one built-in to receive the signal. Flash modes allow you to address special situations. The Sequential Mode enables triggering up to 20 ELCs in bursts or in a continuous cycle. Delayed Mode offers a choice of first or second curtain syncing while Strobo Mode allows single frame stroboscopic action sequences. Finally, the auto-sensing multi-voltage power supply means that you can use the ELC Pro HD 500 anywhere in the world.

The Elinchrom Standard
  • OLED display for information and clarity
  • Dashboard for an enhanced experience
  • Precise control

Flash Modes
  • Sequence Mode allows you to sequentially trigger up to 20 ELCs, in bursts or as a continuous cycle to utilize the high frame rate of your camera
  • Delayed Mode provides the option of first or second curtain sync and everything in-between
  • Strobo Mode allows you to take a picture with stroboscopic effects in a single frame
  • Built-in EL-Skyport receiver for triggering
  • EL-Skyport with 8 frequency channels with 4 groups
  • EL-Skyport Speed Sync mode for synchronization up to a 1/320 sec. on enabled SLR cameras
  • Intelligent pre-flash detector system to enable the use of ELC units with speedlights
  • 8 f-stop range
  • Action-freezing flash durations of 1/2,330 @ full power (t0.5) and as short as 1/5,000 sec. at 53W/s
  • Stable even at fastest recycling times
  • Up to 20 flashes per second
  • Consistent color temperature with +/- 150K°
  • Power Auto-dump
  • Multi-voltage auto-detection: 90-265VAC excluding modeling lamp
  • Low 5V sync voltage safe for all digital camera systems
  • Intelligent low noise fan spins slower or faster depending on the internal temperature of the unit
  • Impact resistant and fire retardant body shell
  • Accessory bayonet permits use of the complete range of light modifiers
Maximum Watt/Seconds 500
Guide Number 212.6' (64.8 m) @ 3.3' (1.0 m), ISO 100 with 48° reflector
Recycle Time At full power:
@ 230VAC Slow: 2.0 sec., Default: 0.75 sec., Fast: 0.6 sec.
@ 115VAC Slow: 2.5 sec., Default: 0.9 sec., Fast: 0.7 sec.
Maximum flashes per sec at min power: 20
Flash Duration Min / Max: 1/2,940 / 1/2,330 @ t0.5
At 53W/s: 1/5,000 (3.1 power setting)
Flash Variability 7.0 Stops: 7.0 - 500W/s Power range display: 0.3 - 6.3
Color Temperature 5,500K
User Replaceable Flashtube Yes, S-Type, Omega plug-in
Changeable Reflector Yes
Modeling Light Wattage 300W
Modeling Light Control Full, Free, Proportional
Voltage Stabilization Yes, +/- 0.1%
Flash Ready Indicator Audible and LED
Operating Voltage 90 - 265VAC, 50/60Hz
Sync Voltage 5.0V
Sync Socket 3.5 mm Jack
Umbrella Mount 7.0 mm Diameter
Built-in Slave Cell Optical/IR
Integrated transceiver: 8 frequency channels with 4 Groups with full RX features
Circuit Protection Fuse
Power Consumption @ 230VAC, 50Hz
Slow: during charge: 350
Default: during charge: 700
Fast: during charge: 875
@ 115VAC, 60Hz
Slow: during charge: 250
Default: during charge: 500
Fast: during charge: 625
Pure Sine Wave Converter AC/DC, slow charge: 600 with halogen
Fan Cooled Yes, temperature-controlled
Auto Dump Yes
Dimensions 12.4 x 5.5 x 8.2" (31.5 x 14 x 21 cm) With protective cap
Weight 5.18 lb (2.35 kg)
  • Mains Cable
  • Sync Cable
  • Modeling Lamp (300W)
  • Glass Dome
  • Protective Cap
  • Reflector (6.3"/90°)

Recommended Products



Sold Out