Pre-Order

Benro C373FBS7 S7 Video Head and CF Flip Lock Legs Carbon Fiber Video Tripod Kit

RM 2460.00

Warranty 6 Year By Local Distributor

SKU: BENRO-C373FBS7

  Add to Cart
  Price Match

  Wishlist

Benro S7 Tripod System Overview

The Benro S7 Tripod Kit with A373F Carbon Fiber Legs is designed to support camera rigs weighing up to 15.4 pounds. The kit pairs the S7 video head with the 2-stage, 3-section A373F Series 3 carbon fiber tripod. The head attaches to the tripod using a removable 75mm bowl adapter, and attaches directly to tripods, monopods, sliders, and other camera support equipment with a 3/8"-16 threaded stud. The system has a maximum height of 63.58", a minimum height of 11.6", and weighs 7.5 pounds. A carrying case is included for convenient transport and storage.

The head features a 4-step counterbalance system to counter the weight of your camera or heavy lens, and continuous pan drag adjustment so you can dial in the right amount of tension for each shot. The pan and tilt locks operate independently of each other and are located on the operator side of the head for easy access and control. The head has a tilt range of -50° to +90°. Your camera attaches to the S7 head via an included Manfrotto 501/504PL compatible sliding quick release plate. Also included is an adjustable-length pan bar handle which can be mounted on either side of the head. Additional features include an illuminated bubble level and two 3/8"-16 threads for attaching optional accessories such as a monitor or recorder.

The A3573F Series 3 carbon fiber tripod legs features a 2-stage design, with three sections that are secured using flip-lock levers. The legs feature a spreader-less design with three discreet stops for locking them at different degrees of spread. In addition, they can be opened fully for low-angle shooting. For a secure grip on virtually any surface, the tripod has screw-in rubber feet can be easily swapped out with included spiked feet.

Head

  • Supports up to 15.4 lb
  • 65mm flat base with 3/8"-16 thread
  • 75mm half ball
  • 4-step (0-3) counterbalance: 0, 5, 10, and 15.4 lb
  • Continuous pan drag
  • Independent pan and tilt locks
  • Tilt Range: -50°/+90°
  • Manfrotto 501/504PL compatible sliding plate
  • Two 3/8"-16 accessory threads for mounting accessories, such as monitor or recorder
  • Illuminated bubble level
  • Adjustable-length pan bar

Legs

  • 2-stage, 3-section carbon fiber tripod with 75mm bowl fitting
  • Flip lock levers
  • Three leg angles
  • Screw-in rubber and spiked feet
  • Maximum height: 63.58" (with S7 head attached)
  • Minimum height: 11.6" (with S7 head attached)

Benro S7 Tripod System Specs

System

Load Capacity 15.4 lb / 7 kg
Maximum Height 63.58 in / 161.5 cm
Minimum Height 11.6" / 29.5 cm
Weight 7.5 lb / 3.4 kg

Head

Load Capacity 15.4 lb / 7 kg
Head to Tripod Mounting Thread 3/8"-16 thread (75 mm half ball adapter included)
Counterbalance Steps 4-step: 0 lb / 0 kg, 5.0 lb / 2.2 kg, 10 lb / 4.5 kg, 15.4 lb / 7 kg
Pan Drag Continuous
Tilt Drag 4-step (0 to 3) fluid cartridge
Panning Range 360°
Tilt Range -50° to +90°
Quick Release Plate QR6 (Manfrotto 501/504PL compatible)
1/4"-20 and 3/8"-16 cameras screws
Accessory Mounting Threads 2 x 3/8"-16
Leveling Bubble / Illuminated Yes / yes
Height 4.72" / 12 cm
Weight 3.2 lb / 1.4 kg

Legs

Material Carbon fiber
Bowl Diameter 75 mm
Leg Stages / Sections 2 / 3
Leg Lock Type Flip lock

In the Box

  • Benro S7 Video Tripod Kit with A373F Carbon Fiber Legs
  • A373F Carbon Fiber Tripod
  • 75mm Half Ball Adapter
  • 3 x Spiked Foot
  • Carrying Case

BENRO  C373FS7  VIDEO  TRIPOD