RM 1003.00
SKU: RODE-iXY-L
<iframe width="380" height="216" src="https://www.youtube.com/embed/WPxPVMgTrkw" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Capture naturalistic stereo audio straight to your phone with the RODE i-XY Stereo Microphone, designed for iOS devices with a Lightning connector. With its X/Y stereo microphone arrangement, high-fidelity audio recording, and included accessories, the mic excels for picking up accurate stereo recordings on the go. Use it for concert recording, on-location filming, and more. A zippered case and a foam windscreen are included.
At the heart of the i-XY is a matched pair of 0.5" cardioid condenser capsules, fixed in a perfect 90 degree 'near-coincident' alignment. This results in immersive and true-to-life stereo recordings, captured in incredibly high detail. The mic comes with a windshield and a zippered case.
The mic automatically works with any Lightning equipped iOS device. You can purchase a 30-pin adapter separately for older devices.
The mic provides 24-bit/48 kHz recording, which is perfect for broadcast editing and mixing. You'll note the metal casing for enhanced durability and electromagnetic interference immunity. A software-switchable 72 Hz high-pass filter allows for reduction of unwanted low frequency noise.
Microphone
| Form Factor | Mobile Device Mic |
| Sound Field | Stereo |
| Stereo/Surround Configuration | X/Y |
| Operating Principle | Pressure Gradient |
| Capsule | Condenser |
| Diaphragm | 0.50" / 12.70 mm |
| Polar Pattern | Cardioid |
| Orientation | End Address |
| Circuitry | Solid-State |
| Pad | None |
| High-Pass Filter | 72 Hz (via Software) |
| Gain Adjustment | None |
| Windscreen | Foam (Included) |
Performance
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 120 dB SPL |
| Sensitivity | -42 dB at 1 kHz |
| Equivalent Noise Level | 18 dB A-Weighted |
Connectivity
| Output Connectors (Analog) | None |
| Output Connectors (Digital) | 1 x Lightning |
| Headphone Connector | None |
| Wireless Connectivity | None |
| Bluetooth | None |
Digital Audio
| A/D Conversion | 24-Bit |
| Sample Rate | 48 kHz |
| Operating System Support | iOS |
| Bus Power | Lightning |
Physical
| Color | Black |
| Mounting | Direct Connection to Mobile Device |
| Included Case | Zipper Pouch |
| Included Filters | None |
| Dimensions | ø: 1.6 x H: 1.8 x W: 2.2" / ø: 40 x H: 46 x W: 55 mm |
| Weight | 1.4 oz / 40 g |