LightPix Labs FlashQ x20 for Sony

RM 549.00

SKU: 634158474958S

Package

  Add to Cart
  Price Match

  Wishlist

The compact, lightweight FlashQ x20 with Transmitter for Sony from LightPix Labs is a cost-efficient, Sony ADI / P-TTL-compatible lighting solution with advanced triggering and control features. The lightweight, compact flash easily fits into tight places where larger units can't go. With a guide number of 65, the FlashQ x20 has TTL power selection and runs on two alkaline or rechargeable NiMH batteries, and it will recycle quickly depending on the batteries in use.

One of the flash's clever features is the removeable Sony TTL transmitter that comes with the unit. By detaching the transmitter and mounting the flash head remotely on a light stand, you can adjust power and trigger it from the on-camera transmitter at a distance. In fact, the transmitter can control several x20s simultaneously. Features include 1st and 2nd curtain sync and flash exposure compensation. Perks include a built-in filter holder and tilting capability. Finally, a pleasant surprise is FlashQ x20's LED light, which can be used as a modeling light, or with its high CRI of 95, used as a video light.

Sony Camera Compatibility

a7, a7 II, a7 III, a7R II, a7R III, a7R IV, a7s, a7s II, a7s III, a7C, a6000, a6300, a6400, a6500, RX1, RX1R, RX1 R II, RX10, RX10 II, RX10 III, RX10 IV

Benefits

  • Guide number 65.62' / 20m (ISO 100 @ 32mm)
  • Compatible with Sony ADI / P-TTL
  • Front and rear curtain sync
  • Wireless TTL, off-camera flash any time with detachable transmitter
  • Remote control power ratio, video light level
  • Flash exposure compensation
  • Tiltable flash head
  • Built-in color gel holder
  • LED video light with adjustable color and brightness
  • FlashQ Transmitter with built-in rechargeable Li-Ion battery
  • USB charger for transmitter and x20 flash (using optional NiMH batteries)

Remote Triggering Power Level Adjustment

The x20 functions like a typical on-camera flash while attached to the included shoe-mount FlashQ transmitter. Detaching the flash puts it into wireless, mode allowing it to be used off-camera. Wireless triggering and power level adjustment can then be accomplished via the camera-mounted transmitter

Power

The x20 runs on two AA alkaline batteries or two rechargeable Ni-MH batteries. The transmitter can be conveniently charged via USB

LED Video / Modeling Light

The x20 features an LED light for use as a modeling light or with its CRI of 95, used as a video light

Flash Head

Guide Number 65.62' / 20 m at ISO 100
Coverage Full-Frame
35 to 35 mm
Swivel Head None
Secondary Illumination Video Light

Exposure Control

Exposure Control Sony ADI / P-TTL
Flash Modes None
Power Range None
Flash Compensation None

Wireless

Wireless Operation None
Remote Timing Modes None

Power

Internal Power 2 x AA (Alkaline, NiMH)
External Power Pack Compatible No

General

Mount Shoe

Packaging Info

Package Weight 0.465 lb
Box Dimensions (LxWxH) 4.9 x 4.6 x 1.6"
  • Sony ADI / P-TTL Control
  • Wireless Triggering and Power Adjustment
  • Built-In Gel Filter Holder
  • LED Video/Modeling Light

 

  • LightPix Labs FlashQ x20 with Transmitter for Sony
  • FlashQ Transmitter x20-S
  • 6-Color Gel Pack
  • USB Charging Cable
  • Protective Pouch

 


LightPix  Labs  Flash  Q  x20  Sony  SONY  FE  A7  II  III  IV  V  A9  A1  A6600  A6400  A6500  A6300  A6000  A6100  A7S  A7R  A7C  A72  A73  A74  A75  A7R2  A7R3  A7R4  A7R5  A7S2  A7S3  FX3  FX6  E  MOUNT  ZV-E10  ZVE10  Z-VE10  ZV-1F  ZV1F  1F