■ Monopod to support professional photography: One
trigger allows control of 3 sections.

■ One-hand operation
: Extend and lock with the trigger.

■ One-click safety lock:
Pull down the trigger to activate the safety lock.

■ 1/4" screw hole on the side:
Equipped with a 1/4" screw hole on the side for attaching various accessories.

■ Pedal operation for the base:
Press the pedal to unlock the swivel base,
allowing 360-degree rotation, and press again to lock it in 90-degree increments.

■ Swivel base:
18-degree angle adjustment.

■ Tension adjustment function for smooth operation:
Minimum on the left, maximum on the right.

■ Supports low-angle shooting:
The top and base can be combined to support low-angle shooting.

■ Quick-release system: The top plate
can be removed by pressing the two push buttons and lifting it.
The top plate can be easily snapped back on without pressing the push buttons

. *Please press firmly to avoid sudden pop-up.
*Please be careful not to hold the quick-release area and avoid accidentally pressing the push buttons and dropping the device.

■ 2-in-1 screw
head connection can be switched between 1/4" and 3/8"

■ Equipped with anti-flex screws
The quick-release plate on the top of the 39mm carbon fiber has screws to prevent flexing, enhancing the stability of the attached equipment
*Maximum load including gimbal is 5kg

■ Angle-adjustable base
The base can be angled according to the installation location

■ Detachable foot pad
The 3/8-inch foot pad on the bottom is detachable

■ Adjustable support legs
The support legs can be adjusted within the range of 160mm to 212mm