Super-cardioid Pick-up Pattern
Super-cardioid microphone Mic-M2 has narrower pick-up angle and is slightly sensitive to sound source behind the mic. Therefore, it primely focuses on the sound pick-up in front of the mic and minimizes off-axis sounds. SYNCO Mic-M2 is capable of capturing a clean, isolated sound in a noisy environment, fitting for interview, vlogging, filmmaking, live-streaming, etc.
Support Camera & Smartphone
Built in a 3.5mm audio cable, Mic-M2 mic is compatible with camera and smartphone (both IOS and Android system), one button to switch smartphone/camera mode. With cold-shoe mount under the shock mount, Mic-M2 mic can be installed to various devices like smartphone, DSLR, camera, camcorder easily.
Inbuilt Anti-interference Device
The interference tube installed in Mic-M2 is designed with many of interference holes in the shilelding net could largely filter most of off-axis sound and minimize the destructive noise (like electronic noise, background noise ...) recorded so that it could weaken the interference of the off-axis sound and generate high-quality sound output finally.
Low Self-noise Components
Adopting low noise electronics material, Mic-M2 generates much lower self-noise, comparing to other normal shotgun microphone. Less electrical current would be noticed in the sound recording. Thus you can gain more clear and crisp sound recording without internal noise.
All-in-one Excellent Shock Mount
As an on-camera microphone, Mic-M2 provides a unique shock mount made of PA material, which can primely minimize the jitter during video shooing and the noise caused by it. The shock mount is tough and durable enough to hold and protect the microphone.
No Battery Driven Design
Mic-M2 requires no extra battery, weighing only 52g itself. It is powered by the device you use. Plug and play design makes the operation much easier. No complicated switches or settings.
Super-cardioid Condenser Microphone
SYNCO Mic-M2 super-cardioid condenser microphone ensures the sound from straight ahead is clear and crisp, isolated from background noise. It minimizes surrounding noise and off-axis sound.
Support Smartphone & Camera
Mic-M2 provides a 3.5mm audio cable, which is a universal connector for many photography devidces with 3.5mm input port. It is compatible with smartphone, DSLR and camera.
One Button Mode Switch
A smartphone/camera switch on the back of the microphone. Just use one button to switch smartphone/camera mode without extra TRS/TRRS adapter.
Interference Tube for Directional Pick-up
The interference tube installed in Mic-M2 is designed with many of interference holes in the shilelding net, whose position and size are acoustically set to filter most of off-axis sound and minimize the destructive noise ( like electronic noise, background noise ...) recorded so that it could weaken the interference of the off-axis sound and generate high-quality sound output finally.
Mounting Design for Tool Attachment
At the bottom of the shock mount, there is a cold shoe with 1/4 thread hole. The cold shoe is used for installing the mic to camera or smartphone device while the thread hole is used for connecting sliding rail, tripod or hand grip, which better meets the photographic demand.
Cotton Wind Muff
Equipped with the cotton wind muff, Mic-M2 microphone can minimize the strong wind noise like sea breeze, fans noise. It is easy to install to wind muff in the microphone, just 2 seconds done!
Compact and Light
With the dimensions of 160 x 50.8 x 86mm, Mic-M2 is very small for you to carry around easily. This 52g microphone could be slipped into a briefcase, backpack or handbag and hardly noticed.
• 1x SYNCO Mic-M1 Microphone
• 1x 3.5mm TRS Camera Cable
• 1x 3.5mm TRRS Phone Cable
• 1x Shock Mount
• 1x Cotton Wind Muff
• 1x Specialized Windshield
• 1x Leather Pouch